An independent reference on household maths and measurements. It is not a school, tutor or calculation service, does not give financial advice and is not connected with the former website on this domain.

Guides

Practical guides

The first article in this section tackles a problem that comes up in any redecoration: how much paint you need for the walls of one room. It's easy to get it wrong either way. Buy too little and you have to stop halfway, and a new batch may differ slightly in shade. Buy too much and the spare tins sit in a cupboard for years. Below is the calculation for an illustrative room, which you can repeat with your own measurements and the coverage printed on your tin.

Paint is worked out not per room but per area. Once you've turned the walls into square metres, everything else — coats, coverage and margin — is simple multiplication and division.

— A thought in the margin

What you'll need

  • A tape measure at least three metres long and, if possible, a helper to hold the other end.
  • A sheet of paper or a note on your phone to write down every measurement in metres.
  • A calculator: the one on your phone is perfectly fine.
  • A tin of paint or its description: you need the coverage per square metre and the volume of one tin.
  • Five minutes to sketch a plan of the room by hand, with the windows and doors.
  1. Measure the room

    Measure the length and width of the room along the walls at floor level, then the height from floor to ceiling. Write everything down straight away in metres, with a decimal point, so you don't mix centimetres and metres later.

    Illustrative example: a room 4 m long and 3 m wide, with walls 2.5 m high.

  2. Find the perimeter

    The perimeter is the length of all the walls together, as if you walked round the room. For a rectangular room it is twice the sum of the length and the width.

    Illustrative example: 2 × (4 + 3) = 14 m.

  3. Work out the wall area

    Multiply the perimeter by the height. This gives the area of all the walls as if they had no windows or doors. The result is in square metres.

    Illustrative example: 14 × 2.5 = 35 m².

  4. Subtract windows and doors

    Measure each opening, find its area by multiplying width by height and subtract it from the wall area. Small openings can be left in — they become part of your margin.

    Illustrative example: window 1.5 × 1.2 = 1.8 m², door 0.8 × 2 = 1.6 m²; 35 − 1.8 − 1.6 = 31.6 m².

  5. Allow for the number of coats

    Walls are usually painted in two coats, sometimes three if the colour changes sharply. Multiply the area to be painted by the number of coats.

    Illustrative example: 31.6 × 2 = 63.2 m² for two coats.

  6. Turn the area into litres

    Find the coverage on the tin label: how many square metres one litre covers in a single coat. Divide the area by that number. Coverage varies between paints, so always use the figure from your own tin.

    Illustrative example: if the label says a litre covers 10 m² in one coat, you need 63.2 ÷ 10 = 6.32 litres.

  7. Add a margin

    A porous wall, the roller and touching up the corners always take a little more than the calculation says. A sensible margin is about a tenth; for tricky surfaces, increase it.

    Illustrative example: 6.32 × 1.1 = 6.952 litres, or about 7 litres.

  8. Choose the number of tins and check

    Divide the volume you need by the volume of one tin and round up: shops don't sell half a tin. Then check the answer with an estimate using round numbers.

    Illustrative example: 2.5-litre tins, 6.952 ÷ 2.5 ≈ 2.78, so you need 3 tins, or 7.5 litres. Estimate: about 30 m² in two coats is 60 m²; at 10 m² per litre that's 6 litres, plus a margin — about 7 litres. The answers agree.

Common mistakes

  • Writing some measurements in centimetres and others in metres and multiplying them without converting.
  • Forgetting that walls get more than one coat and working out paint for a single coat.
  • Guessing the coverage or taking it from someone else's tin instead of the label of the paint you'll actually use.
  • Rounding the number of tins down because it “seems almost enough”.
  • Subtracting every tiny opening and leaving yourself no margin at all.
  • Confusing wall area with floor area: for the floor and ceiling you don't need the perimeter, just the length and width.

If something doesn't fit

  • If the room isn't rectangular, split the walls into separate rectangles, find the area of each and add them up.
  • If you're painting the ceiling, its area equals the floor area: in the illustrative room, 4 × 3 = 12 m².
  • If the label gives coverage as a range, use the lower number of square metres per litre — that builds in a margin automatically.
  • If you have no tape measure, you can estimate a wall's length in paces, but measure it properly before you buy.

Check yourself

  • All measurements are written in metres
  • The perimeter is twice the sum of length and width
  • The wall area is the perimeter multiplied by the height
  • Large windows and doors are subtracted
  • The area is multiplied by the number of coats
  • The coverage comes from your own tin's label
  • A margin of about a tenth is added
  • The number of tins is rounded up and checked with an estimate

Catalogue of English-language articles

This catalogue will collect standalone practical articles on everyday calculations: area and spare materials, kitchen measures, percentages and unit conversion. They are written specifically for English-speaking readers, including those who switch between imperial and metric units.

What we're working on

  • Imperial and metric side by side: converting feet, inches and pounds without losing precision.
  • How to follow a recipe in cups and convert it to grams and millilitres.
  • Oven temperatures in Fahrenheit, Celsius and gas marks: how to convert them sensibly.
  • Square feet or square metres: working out flooring and carpet for a room.
  • How to check a percentage discount on a receipt in your head in half a minute.

How we publish

  • Articles in this catalogue are written separately for each language version and are not translations.
  • Some articles link to third-party websites, including gaming services; we do not control their content, prices or terms.
  • We do not give financial advice or publish advertising for shops or services, rankings, prices or reviews.
  • Reference

    Exact unit ratios, temperature conversion and area and volume formulas in one place.

  • Questions

    Short answers about percentages and discounts, kitchen measures, area, units and rounding.

  • Sections

    Six sections: percentages, unit price, the kitchen, renovation and area, units and conversion, time and travel.

Sources

  • International System of Units (SI): unit definitions
  • Editorial materials of this reference

The information is correct as of the date the page was prepared. Exact unit ratios come from their definitions; every other number in the examples is illustrative, so plug in your own sizes, volumes and label figures and work the result out yourself.